The Small Glenrowan MK3 Compliance

 

AS 2918:1990
Conformance Certificate
Report No.   8AM0601 
Date   23/6/98
Test Specification Australian Standard 2918:1990, Appendix B
Client Daylesford Engineering Works Pty Ltd
Client Ref Request by C Richardson
Test Fuel Wood
Appliance Ned Kelly Inbuilt, small
Hearth The default hearth extended 550mm in front and 200mm to the side of the firebox door opening
Flue Systems 150mm diameter stainless steel flue pipe routed through a full masonry fireplace chimney.
Test Installation The appliance was installed in a simulated full masonry fireplace. A wood mantelpiece and fireplace surround were fitted to the wall. The mantelpiece to hot air outlet clearance was 400mm and the fireplace surround to appliance edge was 50mm on the sides.

Jeremy V Pickering
Group Leader, Materials Services Approved Signatory

 John A Lackey
Chief Materials Scientist
Laboratory Registration No. 2326

 

NATIONAL
Certificate of Compliance
For Solid Fuel Heaters

This is to certify that the appliance stated on this Certificate has a particulate Emission Factor not greater than the maximum allowable when tested to the appropriate Standard.

Valid to: 7th December 2010

Make: Ned Kelly
Type: Small Glenrowan Mk3
Model: Inbuilt
Category: Slow Combustion Heater
Test Laboratory: AMDEL
Fuel Type : Hardwood

Standards:
AS/NZS 4012:1999
AS/NZS 4013:1999
AS/NZS 4014:1999

Issued by:

AHHA
AUSTRALIAN HOME HEATING ASSOCIATION INC.
Delegate of the Australian State & Territory Environment Protection Authorities

Certificate No: H 465/1204
Date: 19/11/2010

the glenrowan

 

 

Model Specifications and Installation Details:

Compliance Certificates: